About

Dragstar Performance Centre PLC is based in the state of Selangor, Malaysia and was formed in 2006 as a distributor to various brand names of performance products for the sport compact market industry. Since the beginning, the company’s objective is to become the most premium sort out destination in providing performance and quality parts for those enthuasiasts.

With this in mind, we will try at our best to ensure that all expectation is exceeded in every aspect. At Dragstar, we turn rides into stars!

Advanced Clutch Technology known as ACT is one of the leading clutches and flywheels manufacturers for the past 25 years. ACT has three (3) key points when it comes to their product; Quality, Performance and Technology. ACT has spend countless R&D towards their extensive product lines and committed to engineering new products that meet customers demands. There are no shortcuts taken on the ACT road to performance. Every design has been evaluated for benefits and trade offs. Through out ACT involvement in motorsports industry, they have sponsored well known and professional drivers from drift to time attack such as Stephan Papadakis, Ryan Tuerck, Fredic Aasbo, Tanner Foust, Joon Woo Maeng and many others.

VISIT SITE

When it comes to pistons and connecting rods choice of performance, durability, quality and leading manufacturer for both goods should be non other than CP-CARRILLO. Build to perform and out last in powersport and sport compact which in other words recognized them as a technological leader in pistons and connecting rods design. More over having PANKL Racing Systems as part of their family organization which specializes in developing and manufacturing engine drive train components and also aerospace industry has created a powerful combination of top notch premium products with no regrets!

VISIT SITE

Manufactured in the USA and the best dampers on the market for both ie Sport Compact and Performance Diesel without a doubt. What makes the fluidampr differs from any other crank dampers available on the market is the silicone gel inside the damper which keeps the flywheel in place and functioning whereas other manufacturers use rubber or “elastomer” as the insulator for the internal flywheel. By using rubber, it will deteriorates and wears down and the end result of it the inertia ring becomes unstable and unbalance. Now ask yourself this “ what’s on the end of the crank?”

VISIT SITE

GSC Power Division specialize in manufacturing high performance camshafts especially for the JDM / Sport Compact. Dedicated in optimizing the best camshafts, GSC has what it takes to be the most sort out camshafts manufacturer with its cutting edge design software and quality chill cast and ductile iron billet ground. By using CNC grinding equipments, their products are at a different class!

VISIT SITE

From the land of the rising sun, JUN Auto has been the leading manufacturer and one of the pioneers in the JDM industry for as long as enthusiasts can remember worldwide. From engine parts such as cylinder head to block, handling and drivetrain parts, JUN have been manufacturing quality and top performance products. Countless R&D have been done by the company in developing new products to suit the customers high demand for performance parts and the adaptation of new and improve technology in sport compact market.

VISIT SITE

Based in the U.K, Quaife Engineering has been in the forefront of high performance transmission technology since the 1965. Quaife products varies from gearboxes, axle components, steering, gear kits, differentials and many more. The company has one goal which is to deliver outstanding quality and performance. Quaife uses state of the art and advance software with robotic CNC machining centres in making sure transmission solutions are being deliver consistently across a diverse variety of sectors. The best possible choice for transmissions that money could possible buy!

VISIT SITE

Founded in 2002, Full Race Motorsports LLC has become one of the leading brand names in this modern era in automotive industry when it comes to designs and manufactures precision-engineered in manifolds for the import performance aftermarket. The company has established themselves as the #1 choice for professional drivers and race teams in the sport compact world!

VISIT SITE

PWR Performance Products is an Australian owned company which specializes in manufacturing customs radiators and oil coolers in whatever customer requirements in both motor vehicles and off road motorcycles from race to street. The company takes pride and quality into account. Almost 99.9 % of their products are manufactured in house from core making to assembly. To top that, PWR winners circle are the Red Bull F1 racing team, Tripe 8 Racing team, Jim Beam (v8 super series), Flying Lizard Motorsport (American Le Mans Series) and many others. PWR performance parts choice for the champions!

VISIT SITE

Turbosmart is another Australian owned company founded in 1997 and throught out the years the company has achieved in becoming the world’s leading manufacturer of turbo accessories over more than 50 countries. From blow off valves to waste gates and electronic boost gauges etc, Turbosmart has what it takes to accomodate quality and performance.

VISIT SITE

It’s been more than 50 years when Quartermaster was founded back in the States and as years past by the company has envolved into a full manufacturing and service company and since then Quartermaster has been the forefront in performance clutches and driveline components to racers at every entry level. Quartermaster products are produced on the most sophisicated state of the art CNC equipment available. Maintaining its position as the number one driveline company is no joke and thus knowing this the company is always a few steps ahead in product development and manufacturing. From a product standpoint, Quarter Master serves a broad market that includes Asphalt Short Track, Road Racing, Open Wheel, Dirt Short Track, Driving Schools and NASCAR. The company offers an array of products serving these markets including multi-plate clutches aluminum and steel drive-shafts, quick change gears, starters, hydraulic release bearings as well as “made-to-order” products. Today, Quartermaster has earned the respect and loyalty of racers across the globe.

VISIT SITE

Carbotech Performance Brakes began manufacturing brake pads for more than 20 years ago and like many of their competitors, the main ingredients of the pads were made of carbon and iron. The main problem is that when carbon and iron heats up, it forms carbide. As we all know carbide is use for cutting tools and imagine what is the end result for the rotors? Realising this, the company started building pads out of Ceramic, Kevlar and Carbon for street, autocross and racing applications. Known as the world leader in Ceramic Friction materials, Carbotech is the only brake pads manufacturer in the world with a complete line of ceramic compounds i.e. Carbotech-Ceramic which is undoubtly known for their unsurpassed release and modulation while maintaining very consistent torque control characteristics. Moreover Carbotech brake pads are rotor friendly and contain 100% non corrosive brake dusts – that’s something that has been unmatched by any other brake pads in the industry. Their believe in continous improvement is a cornerstone in the company’s solid reputation is has built because great compounds are not engineered overnight!

VISIT SITE

In 22 years of continous improvent in R&D and manufacturing of gaskets, Cometic Gasket Inc has grown into a leading worldwide supplier of custom and short run gaskets for the motorsport industry. In order to ensure superior performance in all type and various sizes, the gaskets are manufactured from a wide range of materials. From using the latest in advanced technology like the MLS (Multi Layer Steel) or a synthetic blend such as the Aramid Fiber, the company has the answer to everything. Cometic currently supplies gaskets for a variety of hi-performance motorsports markets: ATV, Drag Race, Domestic Automotive, Harley-Davidso, MX/Dirt, Off-Road, PWC, Road Race, Snowmobile, Sport Compact and Street.

VISIT SITE

Disc Brake Australia (DBA) is the world leading disc rotors manufacturer for more than 30 years in terms of performance and superior quality for various model of cars application whether for day to day or race track use. Manufacturing the most comprehensive range of disc rotors in Australia, DBA leads the market in passenger, 4X4 and light commercial vehicles. As well as standard ‘direct replacement’ rotors, DBA manufactures a comprehensive range of enhanced performance products. These boast such features as slotting, cross drilling, improved appearance (including coloured centre ‘hats’) and, in the top line series, a highly sophisticated two-piece design. When it comes to innovation and state of the art technology in rotors performance, DBA is the choice to be reckon with!

VISIT SITE

Since the early days and until now Garrett is known across the world as the leading product brand name when it comes to aftermarket turbo chargers and the #1 choice for many race teams in the motorsport industry. Manufactured by Honeywell Turbo Technologies, Garrett turbochargers has expanded its product line from Journal spec to the GT spec another new evolution in turbo chargers technology which has proven its worth at the highest level of motorsports. Definitely the choice that you can trust!

VISIT SITE

View Larger Map